HT140 hardtail steel bike frame
HT140 hardtail steel bike frame
SUBA_ALL_MOUNTAIN_HT140_STEEL_BIKE
HT140 hardtail all moutain steel bike frame

THE MID TRAVEL 29ER HARDTAIL IS THE EXACT DEFINITION OF MOUNTAIN BIKING

Most of our custom geometry requests were aiming at a mid travel hardtail, so we blend these numbers with our SUBA’s touch: good performances uphill with a balanced straighten seat tube and very capable when the slopes points in the right direction, this is truly the best money can buy frame. Depending on where you live, your riding style or your morphology, pick one of the two frames which features some slight differences in construction. Polyethylene molded downtube protection, 29×2.4 easily fitted, room for a 27,5×2.6 in muddy conditions.

FRAME SPECIFICATIONS

HT140 new for 2022, lighter package with as much material removed where unnecessary (head tube and yoke) w/out compromising strength
  • 16mm seat stays joined with top plate aligned to Top Tube, 
  • Shimmed 31.6mm Seat Tube, 
  • Chain stay to yoke with top plate and no union plate, 
  • 160PM ready S+M – 180 M/L+L+XL with reinforcement from CS to SS, 
  • Gussets on Down Tube and Top Tube, 
  • Boost specific.
HT150-AM sturdy built to extend your area to bike parks
  • Full round tube set, 
  • 19mm seat stays on all size, joined with top plate aligned to Top Tube, 
  • Shimmed 31.6mm Seat Tube, 
  • Chain stay to yoke with top plate but no union plate, 
  • 160PM ready S+M – 180 L+XL with reinforcement tube from Chain Stay to Seat Stay, 
  • Gussets on Down Tube + Top Tube,
  • Boost specific.

FRAMESET

Available in S-M-M/L-L and XL size

We do XS and XXL on request

FROM 1.000 €

SPECIAL OFFER INSTEAD OF 1.320 €

UNTIL THE END OF JUNE 2022

CUSTOM & COMPLETE BIKE

Geometry tweak or complete bike

Hand built wheels available

Drop us an e-mail

MORE INFO

SIZING CHART

HT140

geometry-HT140-29-All -Mountain
geometry-HT140-27-All Mountain

HT150

geometry-HT150-AM

If you know what you want, go straight to the sizing chart, but if you are unsure or in between two sizes, drop us an e-mail.

Our bikes are nothing but balanced, no exaggerated reach numbers, crazy slack head angles or steep seat posts that will ruin your knees. In addition to the reach, we are communicating two main dimensions, saddle height (in relation with the seat setback) for the engine’s performance and the rider compartment (paired with the reach) for the rideability.

Our best advice is still to know what you like and dislike from your previous bike and trust our expertise for your next one.

SUBA frames share the same common features, whatever the range, model, or size:

· Designed and built by hands in our facility located in Cataluña; all special parts designing, communication and promotion internally made.

· Materials are only from Reynolds Technologies quality steel tube (853-631-525 depending on the application); SUBA’s design locally sourced CNC parts: straight 44mm headtube for tapered fork, T47 bottom bracket shell for increased tube to tube brazing surfaces, dropouts allowing Boost or conventional chain line and sacrificial bolt to hold derailleur hanger, gearbox bracket with Effigear and Pinion compatibility, chain stay to bottom bracket yoke 28 tooth-6mm offset minimal // 34-0 front ring maxi. integrating lower ISCG’05 tabs.

· Full length 31.6mm seat tube without any telescopic seat post length restriction; integrated seat clamp. Optional 27.2mm seat tube.

· Internal routing for all derailleur, seat post actuation and brake lines.

· Minimum of 2 water bottle bosses at least on the down tube with custom polyethylene with absorbing foam downtube protector on MTB range.

· SUBA scheme for custom choice of colours, white or black vinyl stickers, (chrome on option), complete custom paint is an option.

· Delivered with pre-routed wiring for an easy installation, eligible for pre-installation of complete housings and brake line, foam dampening housings: contact us.

KLUNKER STEEL FRAME

OPTIONAL UPGRADES

  • Custom geometry: 210€
  • Custom colours spray with your own scheme: 210€.
  • Chrome vinyl stickers: 25€
  • Gearbox ready, all range of frames: +380€ including universal gearbox bracket, chain front retainer for 28 tooth max, SUBA eccentric thru axle dropouts.
    • Frameset with Mimic by Effigear gearbox, shifter + 26 or 28 front ring: 1080€
    • Polyethylene box guard by Amygos: 116€
    • Installation and tuning for the gearbox: 240€ incl. Jagwire LEX SL for seat post and shifter housings, your choice of brake line, foam housings damper. Option giving access to a 40% discount on carter.
  • Sliding dropouts, PM 160 mount: 85€
  • Extra mid Klunker style tube, Reynolds 853 oval: 85€
  • Extra bottle cages bosses or built-in frame bag bosses: 45€
  • Bright Racing Shocks forks: xCO for Trail range, Skunk for AllMountain, Next for Enduro, price on request.
  • Hope headset, Wheels Manufacturing T47 Dub bottom bracket: price on request.